What PSI Do You Need for Cleaning Exposed Aggregate Driveway?
@andrenrvh272
Around 1,500–2,500 PSI is a practical working range for cleaning many sound exposed aggregate driveways, but there is no single pressure setting that suits every surface. Start at the lowest effective pressure and test an inconspicuous area first. Older concrete, loose stones, damaged cement paste or deteriorating sealer may require much gentler cleaning.

On the Sunshine Coast, humidity, shaded areas and wet weather encourage algae and organic buildup. Suitable pretreatment often removes this contamination more effectively than simply increasing pressure.
What Determines the Right Pressure?
PSI measures water pressure, but cleaning performance also depends on water flow, nozzle selection, working distance and the condition of the driveway. A machine’s advertised maximum PSI is not necessarily the pressure you should apply to the surface.
- Concrete condition: Cracks, crumbling areas and loose aggregate need assessment before pressure cleaning.
- Sealer condition: Excessive pressure can strip or mark an existing coating. Check the sealer manufacturer’s cleaning instructions.
- Contamination: Algae, oil and rust require different treatments. Pressure alone may not remove embedded stains.
- Nozzle and distance: A narrow jet or close working distance increases the risk of surface damage.
How to Clean Exposed Aggregate Safely
- Inspect and sweep: Remove loose debris and check for damaged areas, unstable stones and peeling sealer.
- Pretreat where needed: Use a cleaner labelled as suitable for exposed aggregate and any existing sealer. Follow dilution and dwell-time instructions, protect nearby plants and never mix cleaning chemicals.
- Test at low pressure: Use a wide fan nozzle, such as a 25-degree or 40-degree tip, starting approximately 30–45 cm from the surface. Increase pressure only if necessary.
- Clean evenly: Keep the nozzle moving with overlapping passes. Avoid zero-degree jets and aggressive turbo nozzles on vulnerable surfaces.
- Rinse and inspect: Stop if stones loosen, the surface sheds sandy material or the sealer becomes patchy.
Is 3,000 PSI Too Much?
Do not treat 3,000 PSI as the default setting. Some sound, unsealed exposed aggregate surfaces tolerate professional cleaning at this pressure, but others suffer damage. Higher pressure can erode the https://zanderjoyw038.westhavenscope.com/posts/understanding-water-restrictions-for-cleaning-on-sunshine-coast cement holding the stones in place, particularly when the nozzle is too close.
A compatible surface cleaner can help produce an even result across a large driveway. However, it is not automatically safer: nozzle sizing, operating pressure and movement speed still matter. Follow both the equipment and surface manufacturer’s guidance.
Sunshine Coast Runoff and Safety Considerations
Plan runoff control before starting. Keep detergent, oil, sediment and contaminated wash water out of stormwater drains and waterways. Check current Sunshine Coast Council guidance and any applicable water restrictions, and use suitable containment or wastewater recovery where necessary.
Wear eye protection and non-slip footwear, and keep people and pets away from the work area. For loose aggregate, persistent stains or uncertain sealer condition, arrange a professional assessment rather than increasing pressure. The right approach uses the lowest effective pressure—not the highest available setting.


House Washing Sunshine Coast
(07) 5241 4915